The internet is losing it.
Sawzall blades are cheaper and actually remove the offending infrastructure. Faraday cage the electronics until they naturally discharge. Harvest the goodies thereafter. Be smart. Be safe. De-flock.
A plastic cover only hinders the camera. There are more surveillance devices within. The only sure method of disablement is complete destruction.
Gotta take out the Bluetooth to make it worth it
Vaseline is cheap and accomplishes the same result
Silicone spray…once a surface is contaminated with silicone there’s virtually nothing that can clean it off other than gasoline or similar molecules.
While gasoline is far more expensive than it used to be, it’s still pretty fucking cheap for a cleaning agent.
But you probably would not want that anywhere near a camera. Most lenses are plastic or have coatings or glues that turn hazy in contact with hydrocarbons. So its silicone hazy or crazed plastic haze. Pick your tick.
Eh… You’d be surprised at how trivial it is to make things impervious to such basic chemicals. This isn’t the 80s.
Most lenses are plastic
No they’re not. Glass is optically far superior and not that much more expensive.
This makes me wonder if it’d be possible to print some transparent stickers with some kind of noise pattern that is very subtle, but enough to disrupt any kind of detailed image recognition.
Then maybe it’d go undetected for a while, potentially, but basically would turn the camera into a cctv camera.
Don’t print this if your printer has one of those internet-connected ghost gun print scanning systems.
People who are motivated to print and deploy these are likely not going to have one of those compromised printers.
Just use crazy glue
Another pointless protest. Do people seriously believe this kind of performative gathering is going to stop indiscriminate mass surveillance? It’s just the organizers creating more noise for self-promotion and microplastics everywhere 💀
Someone in the comments recommended using an actual old sock. I don’t know. I don’t like these things. but I don’t have a circular saw. To be fair, I don’t have a 3D printer either. Is spray paint and old socks the way?
150g filament and takes less than four hours
Seems like a lot to me. I think an old sock is better
Baseball is a popular pasttime in america, perhaps we should all practice. Hrm, I could be in the wrong sub.
Hacksaws are pretty cheap and a good blade on a tight saw makes shockingly fast progress on aluminum and mild steel.
Give me 4 hours, some duct tape, and some old cardboard and I can make more than one Flock Camera UV Protection Cover. Biodegradable too. For the most part.
this has shown not to be effective flock just sends someone to remove it, only sawing the pole off is, it makes them waste more resources putting up a new one.
n
Scratch the lens?
Why not tie a plastic bag on it though
