Am I crazy or is there absolutely nothing preventing that bolt from sliding out?

Latch needs to rotate to slide out
that angle helps a ton
I have a latch like this on my side gate,
When ever I ask a friend to lock it on the way out they lock it the wrong way leaving it to slide out.
At least it looks secure though.
The bolt needs to be rotated upright then padlocked.
This one however appears fine
I think the hook on the end of it prevents sliding to the right, the lock being where it is prevents rotating the handle away from the door which would allow it to slide.
Or the lock is keeping a flat piece from rotating out of the way.
But I’m really guessing.
Edit - I’m pretty sure the rod is intended to rotate since there’s a curved notch in the plate just above the padlock
I’ve used similar latches, there’s supposed to be a second bar with a hole in it that the L shaped bar will rotate and flip over, and when you place a lock in the holes the lock will keep the L shaped bar from rotating outward.
No second bracket is visible, so it’s either a smaller one hidden from view by the lock or nobody installed it, thus making this lock as simple as “move the latch, the lock will barely be an inconvenience once you wiggle it slightly out of the way”
deleted by creator
Yea, I think you’re right, looking at how the plate is bent at the lock, letting the bar slip by.
Nothing preventing the Phillips screws from being unscrewed
deleted by creator
At least it forces them to do the “breaking” part of “breaking and entering”?
A crowbar would be faster either way.

bet their Chinese Spy Meme is gonna be hilarious in 2 weeks
Months
Lockpicking Lawyer here and what I have for you today…
Is my wife’s beaver. I’m going to show you how I fill it …
Reminds me of that picture of a security gate with open grass to either side, with well-worn tire marks going around both sides.
Also, how is this deadbolt supposed to work? Should they have used security screws? Or had the bolt go into a hole in the masonry? I can’t see how you would use that bracket in any way that would prevent someone from just unscrewing it.
I don’t think this latch was designed to be a security device in the first place. Seems like a simple gate latch that’s only meant to hold the door closed, and somebody has attempted to secure it when it was never designed to be secured.
(Yes, security screws might help… But only slightly. That just means the intruder needs to find a more obscure screwdriver.)
How much smaller does the key space become if you leave out all the “obvious” numbers?
How far from the edges of they key space do we need to go before it’s considered safe?
if you drop like 1% of the numbers for some reason or another, then you dropped millions and millions of obvious choices, while sacrificing virtual no security.
Let’s start with “at least 3 digits”.







